The Blixxton-2 performance module is designed to work with John Deere applications. The Blixxton-2 is one of our original and most popular modules that we designed and it has been proven over and over throughout the years. It’s simplicity, ruggedness and durability has provided a winning combination that has become a customer favorite.

The Blixxton-2 is simple to install. Just plug in one harness connector, mount the box and you’re ready to go. The Blixxton-2 will come preprogrammed with three settings (stock, 15% and 30%). Other power levels are available but this would be a custom application.

Features:

Three position switch
Rugged design
Installs in minutes
Seat of the pants improvements

This is the fourth generation of the performance modules. It’s new and the only “smart” design module on the market. After you connect to your vehicle, the module will monitor the communication between the vehicle’s engine and ECM. It will make a positive identification of the BUS speed and communication protocol and only then become active. When not in use, the Blixxton-5 has a stealth mode which allows your technician to perform a full scan of your machine without any interference.

The blixxton-5 module will provide power only when you need it. So, while the engine is at idle or without any load the Blixxton-5 will remain “quiet” and will not interfere but once it does sense an increase in engine load the module will automatically adjust for the desired power output. The Blixxton-5’s new high speed process will sample and adjust itself up to 200 times per second. This is unlike other brands which will give you power all the time. This is wasting fuel and causing unnecessary load on the engine.

As a result from this “smart” technology design, you will get the best power when you need it and definitely the best fuel economy of up to 20% savings per acre.

Features:

28 different performance and fuel saving programs

End user adjustable

Simple installation (no tools needed)

Best performance in its class

0-35% power increase

After countless complaints from our customers that they could not keep up with the bigger engine in their rival “Red” tractors, the Blixxton-200 module was specifically designed to work with the 12.5L and 13.5L engine. The issue was a lock of power and increased fuel consumption compared to the 15L 500 HP Cummins engines. We’ve been tuning these tractor ECM’s for a long time now and evn though power and performance was very impressive, it was difficult to for some customers to take the tractor out of commission for a few days while we would complete our programming work.

Because of this, we realized the importance of mail order power. The answer is our Blixxton-200 module. This eliminates any down time and still produces the desired power. We know what it takes to produce great performance for these machines which you will not find in those “other small cheater boxes” on the market offered by our competitors. The blixxton-200 was designed to have full control of the injectors. We can control the injector pulse width and injector timing. This approach to the tuning problem will allow us to control the amount of fuel coming into the engine and precise timing of the injection.

So what does this mean to you? First of all, by installing the Blixxton-200 module on your machine you will be able to add between 60 and 150 additional horsepower while at the same time making your engine more efficient thus saving a noticeable amount of fuel (up to 20% per acre). The Blixxton-200 will also allow you to pick from four preset performance settings and the ability to fine tune each one of them.

The Blixxton-200 is simple to install and adjust. All you have to do is plug it into the injector harness on the back of the engine cylinder head, connect 12v keyed on power and ground. That’s it. You are ready to enjoy the increased performance of your machine.

The Blixxton-208 module was specifically designed to work with the 8.1L engine. We’ve been tuning these tractor ECM’s for a long time now and even though power and performance was very impressive, it was difficult to for some customers to take the tractor out of commission for a few days while we would complete our programming work.

Because of this, we realized the importance of mail order power. The answer is our Blixxton-208 module. This eliminates any down time and still produces the desired power. We know what it takes to produce great performance for these machines which you will not find in those “other small cheater boxes” on the market offered by our competitors. The blixxton-208 was designed to have full control of the injectors. We can control the injector pulse width and injector timing. This approach to the tuning problem will allow us to control the amount of fuel coming into the engine and precise timing of the injection.

So what does this mean to you? First of all, by installing the Blixxton-208 module on your machine you will be able to add between 60 and 150 additional horsepower while at the same time making your engine more efficient thus saving a noticeable amount of fuel (up to 20% per acre). The Blixxton-208 will also allow you to pick from four preset performance settings and the ability to fine tune each one of them.

The Blixxton-208 is simple to install and adjust. All you have to do is plug it into the injector harness on the back of the engine cylinder head, connect 12v keyed on power and ground. That’s it. You are ready to enjoy the increased performance of your machine.

The Blixxton-209 module was specifically designed to work with the Tier-3 9.0L engine. We’ve been tuning these tractor ECM’s for a long time now and even though power and performance was very impressive, it was difficult to for some customers to take the tractor out of commission for a few days while we would complete our programming work.

Because of this, we realized the importance of mail order power. The answer is our Blixxton-209 module. This eliminates any down time and still produces the desired power. We know what it takes to produce great performance for these machines which you will not find in those “other small cheater boxes” on the market offered by our competitors. The blixxton-209 was designed to have full control of the injectors. We can control the injector pulse width and injector timing. This approach to the tuning problem will allow us to control the amount of fuel coming into the engine and precise timing of the injection.

So what does this mean to you? First of all, by installing the Blixxton-209 module on your machine you will be able to add between 60 and 150 additional horsepower while at the same time making your engine more efficient thus saving a noticeable amount of fuel (up to 20% per acre). The Blixxton-209 will also allow you to pick from four preset performance settings and the ability to fine tune each one of them.

The Blixxton-209 is simple to install and adjust. All you have to do is plug it into the injector harness on the back of the engine cylinder head, connect 12v keyed on power and ground. That’s it. You are ready to enjoy the increased performance of your machine.

The Blixxton-248 module was specifically designed to work with the Tier-4 6.8L engine. We’ve been tuning these tractor ECM’s for a long time now and even though power and performance was very impressive, it was difficult to for some customers to take the tractor out of commission for a few days while we would complete our programming work.

Because of this, we realized the importance of mail order power. The answer is our Blixxton-248 module. This eliminates any down time and still produces the desired power. We know what it takes to produce great performance for these machines which you will not find in those “other small cheater boxes” on the market offered by our competitors. The blixxton-248 was designed to have full control of the injectors. We can control the injector pulse width and injector timing. This approach to the tuning problem will allow us to control the amount of fuel coming into the engine and precise timing of the injection.

So what does this mean to you? First of all, by installing the Blixxton-248 module on your machine you will be able to add between 60 and 150 additional horsepower while at the same time making your engine more efficient thus saving a noticeable amount of fuel (up to 20% per acre). The Blixxton-248 will also allow you to pick from four preset performance settings and the ability to fine tune each one of them.

The Blixxton-248 is simple to install and adjust. All you have to do is plug it into the injector harness on the back of the engine cylinder head, connect 12v keyed on power and ground. That’s it. You are ready to enjoy the increased performance of your machine.

The Blixxton-249 module was specifically designed to work with the Tier-4 9.0L engine. We’ve been tuning these tractor ECM’s for a long time now and even though power and performance was very impressive, it was difficult to for some customers to take the tractor out of commission for a few days while we would complete our programming work.

Because of this, we realized the importance of mail order power. The answer is our Blixxton-249 module. This eliminates any down time and still produces the desired power. We know what it takes to produce great performance for these machines which you will not find in those “other small cheater boxes” on the market offered by our competitors. The blixxton-249 was designed to have full control of the injectors. We can control the injector pulse width and injector timing. This approach to the tuning problem will allow us to control the amount of fuel coming into the engine and precise timing of the injection.

So what does this mean to you? First of all, by installing the Blixxton-249 module on your machine you will be able to add between 60 and 150 additional horsepower while at the same time making your engine more efficient thus saving a noticeable amount of fuel (up to 20% per acre). The Blixxton-249 will also allow you to pick from four preset performance settings and the ability to fine tune each one of them.

The Blixxton-249 is simple to install and adjust. All you have to do is plug it into the injector harness on the back of the engine cylinder head, connect 12v keyed on power and ground. That’s it. You are ready to enjoy the increased performance of your machine.

The Blixxton-2135TR4 module was specifically designed to work with the Tier-4 13.5L engine. We’ve been tuning these tractor ECM’s for a long time now and even though power and performance was very impressive, it was difficult to for some customers to take the tractor out of commission for a few days while we would complete our programming work.

Because of this, we realized the importance of mail order power. The answer is our Blixxton-2135TR4 module. This eliminates any down time and still produces the desired power. We know what it takes to produce great performance for these machines which you will not find in those “other small cheater boxes” on the market offered by our competitors. The blixxton-2135TR4 was designed to have full control of the injectors. We can control the injector pulse width and injector timing. This approach to the tuning problem will allow us to control the amount of fuel coming into the engine and precise timing of the injection.

So what does this mean to you? First of all, by installing the Blixxton-2135TR4 module on your machine you will be able to add between 60 and 150 additional horsepower while at the same time making your engine more efficient thus saving a noticeable amount of fuel (up to 20% per acre). The Blixxton-2135TR4 will also allow you to pick from four preset performance settings and the ability to fine tune each one of them.

The Blixxton-2135TR4 is simple to install and adjust. All you have to do is plug it into the injector harness on the back of the engine cylinder head, connect 12v keyed on power and ground. That’s it. You are ready to enjoy the increased performance of your machine.

Performance module for the John Deere 4.5L Tier-4 engine.

Features:

28 different performance and fuel saving programs
End user adjustable
Simple installation (no tools needed)
Best performance in its class
0-35% power increase

Performance and economy programming for the John Deere computer.

With all our programming, we keep in mind the importance of power, engine life and fuel economy.We offer programming (tuning) to your factory ECU. Depending on your engines current power level, we can offer up to an additional 100 horsepower and up to 15% better fuel economy. From the many years of development, testing and sales we know how far to go. Because of this, we’re able to keep your engine out of harms way so rest assured that you’re not overworking the machine.

For us to do the programming, we need your vehicle’s ECU in our hands. If you’re local you can just schedule an appointment and if you’re not local then you would be required to remove the ECU from the vehicle and ship to us*. In most cases, we can perform our work the same day and ship it right back to you the same day that we received it.

Custom programmed performance module to improve power and fuel efficiency.